3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine
6'-butoxy-2,6-diamino-3,3'-azodipyridine
CAS: 617-19-6
Molecular Formula: C14H18N6O
3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine - Names and Identifiers
| Name | 6'-butoxy-2,6-diamino-3,3'-azodipyridine |
| Synonyms | Niazo Neotropin 6'-butoxy-2,6-diamino-3,3'-azodipyridine 6'-Butoxy[3,3'-azobispyridine]-2,6-diamine 6'-butoxy-3,3'-azopyridine-2,6-diyldiamine 6'-BUTOXY-2,6-DIAMINO-3,3'-AZODIPYRIDINE, 99 2,6-Diamino-2'-butyloxy[3,5'-azobispyridine] 3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine |
| CAS | 617-19-6 |
| EINECS | 210-506-5 |
| InChI | InChI=1/C14H18N6O/c1-2-3-8-21-13-7-4-10(9-17-13)19-20-11-5-6-12(15)18-14(11)16/h4-7,9H,2-3,8H2,1H3,(H4,15,16,18)/b20-19+ |
3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine - Physico-chemical Properties
| Molecular Formula | C14H18N6O |
| Molar Mass | 286.33 |
| Density | 1.3g/cm3 |
| Melting Point | 127-129°C(lit.) |
| Boling Point | 505.8°C at 760 mmHg |
| Flash Point | 259.7°C |
| Vapor Presure | 2.34E-10mmHg at 25°C |
| Refractive Index | 1.643 |
3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection |
3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine - Introduction
6 '-butoxy-2,6-diamino-3,3'-azodipyridine is an organic compound with the chemical formula C12H15N7O. The following is an introduction to its nature, use, formulation and safety information:
Nature:
1. Appearance: 6 '-butoxy-2,6-diamino-3,3'-azodipyridine is a red crystalline or powdery solid.
2. melting point: its melting point is about 235-236 ℃.
3. Solubility: 6 '-butoxy-2,6-diamino-3,3'-azodipyridine is soluble in most common solvents.
Use:
1. Dye: It has good dyeing properties and can be used as a textile and leather dye.
2. Photosensitizer: It can be used as a component of photosensitive materials, such as preparing photosensitive films or printing plates.
3. Laboratory research: In chemical laboratories, it is often used to synthesize and study new compounds.
Preparation Method:
6 '-butoxy-2,6-diamino-3,3'-azodipyridine can be obtained by chemical synthesis. The specific preparation method may vary according to different literature and requirements. A common preparation method is to react 2,6-diamino -3,5 '-azopyridine with butanol under appropriate reaction conditions to obtain the target product.
Safety Information:
1. 6 '-butoxy-2,6-diamino-3,3'-azodipyridine should be stored in a cool, dry, well-ventilated place away from sources of ignition.
2. When handling the compound should wear appropriate protective measures, such as wearing laboratory coats, gloves and goggles.
3. Avoid inhalation or contact with the compound to avoid adverse effects on human health.
4. When using or handling the compound, the relevant safety procedures should be followed and the waste should be properly disposed.
Please note that the above information is for informational purposes only and does not constitute an endorsement or recommendation of a particular brand or application. Prior to the use of the compound, laboratory evaluation and risk assessment should be carried out, and relevant laws, regulations and guidelines should be followed.
Nature:
1. Appearance: 6 '-butoxy-2,6-diamino-3,3'-azodipyridine is a red crystalline or powdery solid.
2. melting point: its melting point is about 235-236 ℃.
3. Solubility: 6 '-butoxy-2,6-diamino-3,3'-azodipyridine is soluble in most common solvents.
Use:
1. Dye: It has good dyeing properties and can be used as a textile and leather dye.
2. Photosensitizer: It can be used as a component of photosensitive materials, such as preparing photosensitive films or printing plates.
3. Laboratory research: In chemical laboratories, it is often used to synthesize and study new compounds.
Preparation Method:
6 '-butoxy-2,6-diamino-3,3'-azodipyridine can be obtained by chemical synthesis. The specific preparation method may vary according to different literature and requirements. A common preparation method is to react 2,6-diamino -3,5 '-azopyridine with butanol under appropriate reaction conditions to obtain the target product.
Safety Information:
1. 6 '-butoxy-2,6-diamino-3,3'-azodipyridine should be stored in a cool, dry, well-ventilated place away from sources of ignition.
2. When handling the compound should wear appropriate protective measures, such as wearing laboratory coats, gloves and goggles.
3. Avoid inhalation or contact with the compound to avoid adverse effects on human health.
4. When using or handling the compound, the relevant safety procedures should be followed and the waste should be properly disposed.
Please note that the above information is for informational purposes only and does not constitute an endorsement or recommendation of a particular brand or application. Prior to the use of the compound, laboratory evaluation and risk assessment should be carried out, and relevant laws, regulations and guidelines should be followed.
Last Update：2024-04-10 22:29:15
![3-[(6-Butoxy-3-pyridinyl)azo]-2,6-pyridinediamine](http://res.chembk.com/assets/str/2d/6/61/617-19-6.png)